D-Link N300 Guía De Instalación Rápida página 5

PROdUCT SETUP
SetUP
SET UP dAP-1325 WITH QRS MOBILE APP
The DAP-1325 can be configured using your smartphone. Search for "D-Link QRS
Mobile" on the Apple App Store or Google Play, and download the app. Next, connect
your smartphone to the DAP-1325 using the SSID and Password information
provided on the Wi-Fi Configuration Card and follow the helpful in-app prompts, or
refer to the product manual for more information.
SET UP dAP-1325 WITH A WEB BROWSER
The DAP-1325 can also be configured using a web browser. Once you have
plugged the DAP-1325 into a wall outlet within wireless range of your router
or connected to your existing wired network, open the wireless utility on
your computer, select the name (SSID) of the DAP-1325 network, and enter
the password (both of these are found on your Wi-Fi Configuration Card).
Next, open a web browser (e.g. Internet Explorer, Firefox, Safari, or Chrome) and
enter http://dlinkap.local./ By default, the username is Admin, and the password
field should be left blank. Please refer to the user manual for further information on
configuring the DAP-1325 using a web browser.
Note: Web browser configuration is not supported for Android Devices. Please use
the QRS Mobile Application to configure your device.
TROUBLESHOOTING
SetUP aNd CONFigURatiON PROBLeMS
1. HOW dO I RESET MY dAP-1325 N300 WI-FI RANGE ExTENdER TO FACTORY
dEFAULT SETTINGS?
- Ensure the product is powered on.
- Using a paperclip, press and hold the reset button on the side of the device for 5
seconds.
Note: Resetting the product to the factory default will erase the current configuration
settings. The default Wi-Fi network name (SSID) and password are printed on
the DAP-1325's Wi-Fi Configuration Card.
2. HOW dO I CONNECT A PC OR OTHER dEVICE TO THE dAP-1325 IF I HAVE FORGOTTEN
MY WI-FI NETWORK NAME (SSId) OR WI-FI PASSWORd?
- If you haven't changed the extended Wi-Fi network's settings, you can use the
network name (SSID) and Wi-Fi password on the Wi-Fi Configuration Card.
- If you did change the network name (SSID) or Wi-Fi password and you did not record
this information on the Wi-Fi Configuration Card or somewhere else, you must reset
the device as described in Question 1 above.
- It is recommended that you make a record of this information so that you can easily
connect additional wireless devices in the future. You can use the included Wi-Fi
Configuration Card to record this important information for future use.
daP-1325
3