Starting Operation - Bosch IXO Grass Shear Manual Original

OBJ_BUCH-2787-001.book Page 18 Monday, December 12, 2016 9:22 AM
18 | English
Note: You can attach the grass shear adapter 1 in 8 different positions. This
enables you to achieve the optimum working position for the job at hand,
e. g. for cutting lawn edges.
Dismounting (see figures B1–B2)
– Press the locking switch 8 of the grass shear adapter downward.
– Set the rotational direction switch 6 to the middle position.
– Slide the blade guard 3 onto the blade 2 (). The blade guard 3 must au-
dibly engage.
– Turn the release ring 5 in rotation direction  and pull off the grass shear
adapter 1 ().
– Afterwards, mount the rubber cap 9 onto the screwdriver again.
Operation

Starting Operation

 Place the screwdriver with grass shear adapter on the blade to put it
down. This prevents moisture from penetrating into the power tool.
Switching On and Off
– Pull off the blade guard 3 of the blade 2.
– To start the screwdriver with grass shear adapter, press the locking
switch 8 upward.
– Set the rotational direction using the rotational direction switch 6.
The grass shear adapter can be operated in right or left rotation.
– Press switch 7 and hold depressed.
– To switch off the grass shear adapter, let go of the On/Off switch 7.
– Set the rotational direction switch 6 to the middle position.
– Press the locking switch 8 downward.
– Attach the blade guard 3 to the blade 2. The blade guard 3 must audibly
engage.
Edging
Guide the screwdriver with grass shear adapter along the lawn edge. Prevent
the blade from coming into contact with paved paths, stones or garden walls
because this significantly reduces the lifetime of the blade. Attach the blade
guard to the blade again after use.
1 609 92A 28R | (12.12.16) Bosch Power Tools