"Rfid" Anti-Hijacking - Excalibur AL-560 Guía De Installación

"RFID" ANTI-HIJACKING

This feature requires the use of the #410-01 RFID Remote.
1) To turn "On" the remote control's RFID function:
Press & Hold the remote's button for 5 seconds, the LED will flash to
confirm the RFID function is "On"
5 seconds
Note: If the RFID feature is "On":
- Every time the remote's button is pressed, the LED will "Flash".
- Every 3 seconds, the remote will transmit a signal and the LED will flash.
- The remote has a built-in motion sensor. If this sensor detects no movement
for 2 minutes, the remote will enter a "sleep mode" to conserve battery life,
until the sensor detects movement again.
2) To turn "Off" the remote control's RFID function:
Press & Hold the remote's button for 5 seconds, the LED will light Solid
to confirm the RFID function is "Off"
5 seconds
Note: If the RFID feature is "Off":
- Every time the remote's button is pressed, the LED will light "Solid".
- If the remote's RFID feature is "Off", it will be necessary to press the Valet
button to cancel the alarm's Anti-Hijacking sequence.
(Programmable Feature #14)
Page 13
(Sold separately)