Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Weight Limit: 200 Lbs / 91 Kgs
All Rights Reserved
Thank you for purchasing !
DO NOT RETURN TO THE STORE !
If parts are missing or damaged, we will gladly ship your
replacement parts free of charge.
Date of Purchase
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Metal Loft Bed
Lot Number
Twin
Black
1
Publicidad
Tabla de contenido
Manuales relacionados para DHP Metal Loft Bed
Resumen de contenidos para DHP Metal Loft Bed
- Página 1 Metal Loft Bed Twin Black Weight Limit: 200 Lbs / 91 Kgs Thank you for purchasing ! DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge.
-
Página 2: Warranty Information
Warranty Information Read Before Beginning Assembly Call our toll free number if you need assistance. Work in a spacious area and near where the unit will be used, preferably on a carpet, or use a piece of the cardboard packaging to protect your floor and product. Recommended # of people needed for assembly: 2 (however it is always better to have an extra hand). - Página 4 Parts All in 1 big box! There are inner box(es) that include components required to complete this assembly. Post 1 Post 2 Post 3 Post 4 Headboard Footboard Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
-
Página 5: Hardware Pack
Hardware Pack 5/16" X 3/4" 1/4" X 3/4" X 22 1/4" X 1 9/16" 1/4" X 2 3/8" Hardware Note: Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions. - Página 6 Step 1 Attach (A,B) to (M) with BOLT 3.
- Página 7 Step 2 Attach (T) to (A,B) with BOLT 3.
- Página 8 Step 3 Attach (C,D) to (U) with BOLT 3.
- Página 9 Step 4 Attach (T) to (C,D) with BOLT 3.
- Página 10 Step 5 Attach (E,F) to (M,U) with BOLT 1 and BOLT 4.
- Página 11 Step 6 Attach (H) X 2 to (B,C) with BOLT 3.
- Página 12 Step 7 7.1 Slide (O) into the slots on (E,F); 7.2 Lock (O) into place with (Y).
- Página 13 Step 8 8.1 Press (W) onto (O) approximately in the middle; 8.2 Press (Q) into (W) alternating left and right.
- Página 14 Step 9 Attach (Z) to (F) with BOLT 2.
- Página 15 Step 10 Attach (L) to (D,Z) with BOLT 3.
-
Página 16: Helpful Hints
Helpful Hints Helpful Hints Weight Limit: 200 Lbs / 91 Kgs Move your new furniture carefully, with two people lifting and carrying the unit to its new location. Your furniture can be disassembled and reassembled to move. Some parts have been pre-assembled for this item. - Página 17 WARNINGS for Bunk Bed Follow the information on the warnings appearing on the upper bunk end structure and on the carton. Do not remove warning label from bed. Always use the recommended size mattresses or mattress supports, or both, to help prevent the likelihood of entrapment or falls. Use only a twin mattress which is 74"-75"...
- Página 18 NO LO REGRESE A LA TIENDA ! Si le faltan piezas o las que se incluyen est n da adas, con Metal Loft Bed mucho gusto le enviaremos sus piezas de reemplazo sin cargo extra. Twin Negro Fecha de compra...
-
Página 19: Lea Antes De Comenzar A Ensamblar
Lea antes de comenzar a ensamblar Partes Llame a nuestro n mero gratuito si necesita asistencia. Trabaje en un rea espaciosa y cerca de donde su producto ser utilizado, preferiblemente sobre una alfombra o utilice el cart n del empaque para proteger su piso y su producto. - Página 20 Instrucciones L mites de peso:200 Lbs / 91 Kgs. Paso 1 Una la parte (A,B) con (M) con los PERNOS 3. Precauc on Paso 2 Siga la informaci n sobre las advertencias que aparecen en el extremo superior Una la parte (T) con (A,B) con los PERNOS 3. de la litera y en el empaque.