Descargar
Compartir
Imprimir esta página
DHP Maven Manual Del Usuario
  1. Manuales
  2. Marcas
  3. DHP Manuales
  4. Muebles de Interior
  5. Maven
  6. Manual del usuario
DHP Maven Manual Del Usuario

DHP Maven Manual Del Usuario

Ocultar thumbs Ver también para Maven:

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Descargar este manual
Weight Limit: 500 Lb / 227 Kg
All Rights Reserved
Platform Bed With Storage
Thank you for purchasing !
DO NOT RETURN TO THE STORE !
If parts are missing or damaged, we will gladly ship your
replacement parts free of charge.
Date of Purchase
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Queen
Black Faux Leather
Lot Number
1

Publicidad

loading

Manuales relacionados para DHP Maven

Resumen de contenidos para DHP Maven

  • Página 1 Platform Bed With Storage Queen Black Faux Leather Weight Limit: 500 Lb / 227 Kg Thank you for purchasing ! DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge. Lot Number Date of Purchase THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY...
  • Página 2 Warranty Information Read Before Beginning Assembly ● Call our toll free number if you need assistance. We warrant this product to be free from defects in material and workmanship and ● Work in a spacious area and near where the unit will be used, preferably on a agrees to remedy any such defect.
  • Página 3 All in 1 big box! There are inner box(es) that include components required to complete this assembly. Before you throw the package, please use the Headboard Footboard Side Panel Side Panel Side Rail Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
  • Página 4 Parts All in 1 big box! There are inner box(es) that include components required to complete this assembly. Drawer Bottom Panel Before you throw the package, please use the Front Panel Drawer Back Panel Drawer Side Panel Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
  • Página 5 Hardware Pack 1/4" X 3/4" 1/4" X 3/4" X 13 1/4" X 1 3/16" 1/4" X 1 9/16" 1/4" X 1 9/16" X 18 6# X 1/2" X 16 1/4" 4# X 1 3/16" X 40 Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions.
  • Página 6 Step 1 Attach Z and F to C with Note: Holes on part F should be facing upward.
  • Página 7 Step 2 Attach F and Z to D with Note: Holes on part F should be facing upward.
  • Página 8 Step 3 Attach E X 2 to C and D with...
  • Página 9 Step 4 Attach I to B with...
  • Página 10 Step 5 Attach Z X 2 to A with Attach E X 2 to B with...
  • Página 11 Step 6 Insert G X 2 into M with...
  • Página 12 Step 7 Attach G X 2 to A and B with...
  • Página 13 Step 8 Attach H to C and D with Note: small tubes on part H should be facing toward part B.
  • Página 14 Step 9 Attach R to E and G with Note: Arched side on part R should be facing upward.
  • Página 15 Step 10 10.1 Insert O1 into X; 10.2 Press X into E and F, repeat the same procedure for the opposite side. 10.3 Insert ends of both slats O1 into Y, then press Y into G as illustrated. Repeat the same procedures going backwards for every row of slats.
  • Página 16 Step 11 Attach N X 2 to S and L with Note: before assembling, line up the screws and holes on N with pilot holes on S and L. Note: For a better looking and for ease of assembly, orientate ALL PANELS with the staples and pilot facing toward the outside and on upper side.
  • Página 17 Step 12 Attach K to S , L and N with Note: For a better looking, orientate the staples toward the outside. Note: before assembling, line up the screws and holes on K with pilot holes on N, S and L. X 24...
  • Página 18 Step 13 Attach Q X 4 to K with Note: before assembling, line up screws and holes on Q with pilot holes on K. X 16...
  • Página 19 Step 14 Turn over sub-assembly from previous step and: 14.1 Attach to J. 14.2 Attach sub-assembly N, L and S to J with 14.1 14.2...
  • Página 20 Step 15 Align both drawers and then push them in. Lock drawers by slightly lifting drawer and inserting the Pin into the Slot. Slot...
  • Página 21 Helpful Hints Helpful Hints Weight Limit: 500 Lb / 227 Kg ● Move your new furniture carefully, with two people lifting and carrying the unit to its new location. ● Your furniture can be disassembled and reassembled to move. ● Some parts have been pre-assembled for this item.
  • Página 22 NO LO REGRESE A LA TIENDA ! Cama Plataforma con Almacenamiento Si le faltan piezas o las que se incluyen están dañadas, con mucho gusto le enviaremos sus piezas de reemplazo sin cargo extra. Queen Cuero Falso Negro Fecha de compra Número de lote ESTE INSTRUCTIVO CONTIENE INFORMACION IMPORTANTE DE SEGURIDAD.
  • Página 23 Partes Lea antes de comenzar a ensamblar ● Llame a nuestro número gratuito si necesita asistencia. Piezas de reemplazo, ● Trabaje en un área espaciosa y cerca de donde su producto será utilizado, preferiblemente sobre una alfombra o utilice el cartón del empaque para proteger su piso y su producto.
  • Página 24 Instrucciones Paso 1 Paso 13 Una Z y F con C usando Una Q con K usando Paso 2 Paso 14 Una F y Z con D usando 14.1 Una con J. 14.2 Una S con J usando Paso 3 Una E X 2 con C y D usando Paso 15 Por favor alinee ambos cajones y luego empújelos hacia adentro.
  • Página 25 NE RETOURNEZ PAS AU MAGASIN ! Cama Plataforma con Almacenamiento Si une pièce est manquante ou endommagée, nous vous expédierons avec plaisir vos pièces de remplacement gratuitement. Grand Faux Noir Date d'achat Numero de lot CE FEUILLET CONTIENT DES INFORMATIONS DE SÉCURITÉ IMPORTANTES. S'IL VOUS PLAÎT LIRE ET CONSERVER POUR RÉFÉRENCE ULTÉRIEURE.
  • Página 26 Pièces Avant de commencer l'assemblage ● Si vous avez besoin d'aide, appelez notre service à la clientèle sans frais. Pièces de rechange, ● Travailler dans un endroit spacieux et près du lieu où l'unité sera utilisée, préférablement sur un tapis, ou sur un morceau de l'emballage pour protéger le Tout dans 1 grosse boîte! plancher et le produit.
  • Página 27 Instructions Étape 1 Étape 14 Attacher Z et F à C avec 14.1 Attacher à J où indiqué; Étape 2 14.2 Attacher S à J à avec Attacher Fet Z à D avec Note: Les orificies en F doivent etres orientés vers le haut. Étape 15 Alignez les tiroirs et puis poussez-les vers l'intérieur.