Battery Charging; Status Led - Elinchrom EL-Skyport Instrucciones Para El Uso

EL-Skyport
Universal Receiver
19352
Operating instructions :
2.4 GHz digital wireless
Universal Receiver for flash triggering
Features
EL-Skyport flash trigger is designed with the latest 2.4 GHz Digital Wireless Technology.
• Triggers all flash brands with SYNC socket
• Up to 1/1000s shutter speed
• 4 selectable trigger groups
• 8 frequency channels
• 40 Bit security encryption
• Up to 50 m range indoors
• Up to 120 m range outdoors
• Internal rechargeable Battery lasts up to 30 hours
• Integrated Quick Charger circuit
• 3.5mm SYNC-socket for all common flash units
• Auto-Standby function after 4 hours
You will appreciate the convenience of this professional, and powerful wireless device.
Note:
Shutter speed and distance range is influenced by reflections (from ceilings, walls, floor, furniture and
other equipment) and interference from other 2.4 GHz electronic equipment. For best performance the
Transmitter and Receiver antenna should have direct sight, without any walls or objects in-between.
2

Battery Charging

The internal Li-Ion battery is rechargeable. Use only the EL-Skyport Wall-Adapter Charger.
1. Switch OFF the unit for fastest charging time.
2. Connect the EL-Skyport charger to the Universal charge socket and connect to
mains supply
3. When the Status LED is ON, charging is in progress
4. When the Status LED is OFF, the Battery is fully recharged
! CAUTION:
Use only the original Elinchrom EL-Skyport Wall-Adapter Charger (19355 EU)
•
to charge the battery
• Do not open the housing to replace the battery
• Switch OFF when the Universal Receiver is not in use to save Battery power. Note:
Stand-By mode does not completely switch off the unit.

Status LED

OFF Universal Receiver
• is switched OFF or
• when Charger is plugged-in, the Battery is fully recharged or
• if switched ON, the unit is in Stand-By mode. (Switch off and on to reawaken)
ON
Universal Receiver charges.
Flashing Universal Receiver is in operating mode
3