Useful Tips; Disassembly For Cleaning - Fisher&Paykel Vitera Guía De Uso Y Cuidado

2 ENGLISH
ii
FITTING YOUR MASK
Remove all packaging before using your mask.
Refer to the fitting images on the inside front cover of this guide.
1. Hold the front of the mask with one hand and the Headgear
the other. Ensure that one Headgear Clip
Frame .
2. Place the Seal
your head.
3. Hook the unattached Headgear Clip
4. Gently tighten the Headgear straps of the Headgear
with the bottom straps, followed by loosely fitting the blue forehead
straps.
Caution
To avoid the risk of suffocation, ensure the headgear is not
overtightened. The mask, when fitted correctly, should be able to
be pulled away from the mouth without adjusting the headgear
straps or disconnecting the Headgear Clips

Useful Tips:

• If you are experiencing mask leaks, you may need to lift the Seal
off your face and reposition it.
• Ensure the Headgear straps are not fastened too tightly.
• The blue forehead straps should rest horizontally just above the
ears. If required, the crown strap can be adjusted to achieve this.
• For easy mask removal, rotate Headgear Clip
unhook Headgear
iii

DISASSEMBLY FOR CLEANING

1. Unhook the Headgear Clips
2. Slide the Forehead Clip
3. Remove the Seal
4. Remove the Swivel
onto your face and guide the Headgear
.
from the Frame
downwards towards the Seal
from the Frame
from the Elbow
is unhooked from the
onto the Frame
.
downward to
.
.
.
with
over
.
starting
.