Publicidad
Idiomas disponibles
Idiomas disponibles
Paragraph 17 - Setting the Pause
Programming
PROG
Configuration
+
Paus
N.Open
-
Display contrast adjustment.
For adjusting the display contrast keep the key
increase or decrease the contrast.
Alarms
Display
Fixed alarm LED
Flashing word "Lev"
I.e.
Man
Lev
P100%
Fixed alarm LED
Flashing words "Lev" and "stop"
I.e.
Man
Lev
Stop
P100%
Flashing word "Mem"
I.e.
1:n
Mem
Flashing word "Mem"
I.e.
1:n
M
Mem
Fixed alarm LED
Flashing word "Flw"
Man
F
I.e.
Flw
P100%
I.e.
Parameter Error
PROG to default
EM00136061
All manuals and user guides at all-guides.com
The pump can be paused by remote input.
The factory setting is Normally Open.
Changes can be made by pressing the
-
+
using the
-
N. CLOSED).
Press
pressed and within 5 seconds press the keys
Cause
End
of
level
interrupting pump operation
End of level alarm, with interruption
to pump operation
The pump receives one or more
pulses during dosage with memory
6
function on Off
The pump receives one or more
6
pulses during dosage with memory
function on On
Active flow alarm. The pump has
not
received
number of signals from the flow
sensor.
Internal CPU communication error.
rev. 2.5
Operation
keys to set the new value ( N. OPEN or
to confirm and return to the main menu.
alarm,
without
Restore the liquid level.
Restore the liquid level.
Press the
When the pump finishes receiving
external impulses, it returns the
memorized strokes
the
programmed
Press the
Press the
default parameters.
EN
key, then
or
to
Interruption
key
key
key to restore the
11
Publicidad
