Listening To Your Voice Messages; About - Selta NETFON 130 Manual De Usuario

User operations
48
Answer a phone call
Hold and resume the call
Enable/Disable
microphone (mute)
Transfer the phone call in
progress
Redial last number
(1) It is a SAMBuilder customation data from (contact your system administrator).
(2) The headset mode means that the headset mode is enabled in the profile of the telephone, from
SAMBuilder application (ask the system administrator) or from the programming telephone menu.
IMPORTANT!
- Call waiting tone in a multi-line phone, will be played on the audio device you are using (loudspeaker,
headset or handset).
- The caller ID of the second call ("flash") is displayed for a few seconds on the display by adding the
character "*" asterisk at the end of the number received, in place of the caller ID of the call in progress.
- In the case of an incoming call while the headset is on, the ringing tone will be produced in both headset
speaker on the speakerphone. In case the user set the Silent mode, the tone will be heard only from
headset.

8.3. Listening to your voice messages

The flashing Voice Mail button indicates a new voice message in your voice mail, to listen to it press the
voice mail

8.4. About

Display the firmware version of the phone and its components. Enter in the local programming menu and
press menu/enter
arrows and confirm.
NETfon 130 - User Guide 723142012-A0-LM
• lift the handset
or
• press speakerphone
or
• from headset mode(2): press ESC
1. put the call on hold with hold
2. resume the call from hold with hold
1. enable and disable the feature with the handset off-hook or press
the button programmed by the system administrator with
"Microphone" function.
1. put on hold the call in progress with hold
2. dial the number of the extension to call
3. wait for the answer and hang up or without waiting for the
answer, hang up, only if the telephone is enabled to automatic
transfer (1).
1. press pound [#].
button and follow the voice instructions.
, scroll the menu up to USER SETTINGS and select ABOUT with up and down
button
button.
button