Ty Pennington STYLE 146.46371610 Guía De Uso Y Cuidado página 12

Step 3:
3
Note: Please make sure to attach Main Post (D) as shown in bellow
fig. otherwise heater control panel will not be facing in the direction
of the front of the heater which is where the door of cylinder
housing is located.
Insert main post (D) onto top of king post (E) as shown attach
using (3) M5*8 countersunk head screws. Do not fully tighten
screws at this time, and leave 2-3mm screw head in outside to
allow pass through of regulator in step 5.
M5*8 countersunk head screw, Qty: 3 pcs
D
E
12
Main-post assembly: Please
attach the main post as shown
with sticker marked (Back)
facing the rear of cylinder
housing.