Product Maintenance - Home Decorators Collection HB7251MA-292 Manual De Instrucciones

PRODUCT MAINTENANCE:

1.Disconnect power to the fixture by turning off the circuit breaker before any
maintenance.
2.To clean the outside of the fixture, use a dry or slightly dampened clean cloth
(use clean water, never a solvent) to wipe the glass and surface of the fixture.
3.To clean the inside of the fixture, first disconnect power to the fixture by
turning off the circuit breaker or by removing the fuse at the fuse box. Next, use a
dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe
the inside glass and interior surface of the fixture.
4.Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a
dry soft cloth to dust or wipe carefully.
DISCLAIMER:
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•Reorient or relocate the receiver antenna.
•Increase the separation between the equipment and receiver.
•Install the product onto on a circuit different from that to which the receiver is
connected.
•Consult with the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes made to the electronics circuit will void this
equipment's compliance with Part 15 of the FCC Rules and should not be
operated.
Page 12