Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION:
1.Before starting installation of this fixture or removal of a previous fixture,
disconnect the power by turning off the circuit breaker or by removing the fuse at
the fuse box.
2.All electrical connections must be in accordance with local and National
Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical
wiring connections obtain services of a qualified electrician.
3.There are no serviceable parts inside the motion sensor. DO NOT try to repair
or disassemble the unit. Doing so could damage the unit and cause possible
electrical shock. Consult a qualified electrician if needed.
SELECTING A LOCATION:
1.When selecting a location, be aware of the motion sensor's maximum range of
30 ft and 220º detection angle (Fig. 1). In addition, be aware of its 15º detection
down-angle (from horizontal) (Fig. 2). Mounting the fixture too high or in front
of a sloped surface, such as an uphill walkway or driveway, may affect the
motion sensor's effectiveness.
2.Select locations away from heat sources, such as heating vents, air conditioners,
and heated swimming pools.
220
15
Fig. 1
Fig. 2
Page 5
Publicidad
Tabla de contenido
Solución de problemas
