Home Decorators Collection HB7251MA-292 Manual De Instrucciones página 8

INSTALLATION & ASSEMBLY (CONTINUED):
5. Place the Wall Plate (#10) over the Outlet Box (#4) and onto the Fixture
Mounting Screws (#6), and adjust the Fixture Mounting Screws (#6) until
they protrude out from the Wall Plate (#10) 1/4". Remove the Wall Plate
(#10) and secure the position of the Fixture Mounting Screws (#6) by
tightening the Hex Nuts (#9) against the Mounting Bracket (#7). Place the
Wall Plate (#10) back onto the Fixture Mounting Screws (#6), and secure it
into place using the Lock Nuts (#3) provided.
6. After installing the fixture, caulk the
upper 2/3s of the Wall Plate (#10) to
mounting surface. Leave the bottom 1/3
un-caulked for drainage of any water that
might leak drainage of any water that
might leak into the enclosure.
manufacturer recommends a non-drying
exterior caulking material.
example is a clear silicone rubber sealant
for exterior use.
7. Install up to a 100 watt incandescent
Light Bulb in the socket of the Main
Fixture Body. Do not exceed a 100 watt
incandescent light bulb or 26 watt SBCFL
(Fig. 5).
8. Installation is complete. Turn on power at
the circuit breaker or fuse box. Turn the
light switch on to activate the fixture.
The
A good
Fig. 5
Page 8