Windows Xp - D-Link DFM-560EL Guía De Instalación Rápida

and click Control Panel. Then double-click on Network icon to
configure the Dial-Up Networking.
10. Click on the Services tab and select Remote Access Service, then click
Properties, If you can't see Remote Access Service on the Add to install
Remote Access Service.
11. Click on the Add button to add modem. If there is any modem in the list,
please click. Remote first.
12. Select D-Link DFM- 560EL External Modem, then click OK to
confirm the settings.
13. Click Configure.. to configure port usage.
14. Select Dial out only for port Usage and click OK confirm the settings.
15. Click Network.. to configure the network.
16. Select TCP/IP click OK to confirm the settings.
17. Click Continue to complete the setup.
18. Click Yes restart Windows NT
19. After restarting your computer, please double-click on the My
Computer icon on the desktop and double-click on the Dial-Up
Networking icon.
20. If your phonebook is empty, please click OK to add an entry.
21. You may use the name provided or enter a different one, then click Next.
22. Select The non-Windows NT server I am calling.. then click Next.
23. Enter the phone number of your local ISP and click Next.
24. Select Point-to-Point Protocol (PPP) and click Next.
25. Consult with your local ISP for the choice and click Next.
26. Enter your IP address if you have a fixed one or leave the value: 0.0.0.0,
then click Next.
27. Enter the IP addresses of a DNS and\ or WINS server for your local ISP
or set 0.0.0.0 if you are not sure. Then click Next.
28. Click Finish.
29. Click on the More buttons and select Edit entry and modem
properties.
30. Select D-Link DFM- 560EL External Modem from Dial using list and
click on the Configure button.
31. Enable all the Hardware Features and select 115200 form Initial
speed(bps) list, then click OK.
32. Click on the Server tab and enable three options of TCP\ IP , Enable
software compression and Enable PPP LCP extensions.
33. Click on the Security tab and enable the option: Accept any
authentication including clear text. then click OK.
34. Click Dial to connect to.
35. Enter User name and Password and click OK, and the modem will dial
out to your ISP and get a connection.
Quick software installation
Windows 2000
1. Windows will detect the modem automatic, please insert the driver CD
supplied and click Next.
2. Select Search for a suitable driver for my device [recommended],
then click Next.
3. Select CD-ROM drives, then click Next.
4. Windows will found a driver for this device, then click Next.
5. Click Yes to continue.
6. Click Finish to end this procedure.

Windows XP

1. Please insert the driver CD supplied when you see the message of
D-Link DFM-560EL External Modem, Select the Install from a list
or specific location [Advanced] then click Next to search for the driver.
2. Select Include this location in the search: and type in H:\ (H is the
letter of the CD-ROM drive) or use Browse, then click Next to continue.
3. Click Continue Anyway to continue.
4. Click Finish to end this procedure.
Diagnostics
Windows 98/ME
1. Please go to Start\ Settings\ Control Panel and double-click on the
Modems icon.
2. To test the modem by clicking on the Diagnostics tab. Then select the
COM Port where Topic Modem is setting and click on the More Info...
button to start the test.
3. If your modem is responding to AT commands and functioning correctly,
it means that your modem is working properly. Click OK to end this
procedure.
Windows 2000
1. Move your cursor as following sequence Start\ Settings\ Control Panel
and click Control Panel. Then double-click on the Phone and Modem
Options icon.
2. Click Modems tab, then select D-Link DFM-560EL External Modem
and click Properties.
3. Click Diagnostics tab, then click Query Modem.
Quick software installation