Velleman DVR16H3 Guía Rápida página 12

13.1 Prerequisite
Before installing EagleEyes on your mobile phone for remote surveillance, make sure you have checked the following:
 Your mobile platform is iPhone
 You have subscribed to mobile internet services on your phone; the service is available for use on your phone.
Note: You may be charged for internet access via wireless or 3G networks. For the internet access rates, contact your
local network operator or service provider.
 You have noted down the IP address, port number, user name, and password used to access your network camera via
internet.
13.2 Downloading EagleEyes
1. Connect to www.eagleeyescctv.com from your mobile device.
Note: Do not download EagleEyes from your computer.
2. Select Products > Software > Mobile app to access the EagleEyes introduction page.
3. Select your platform (iOS, BlackBerry
Note: This DVR is compatible only with iPhone
4. Follow the on-screen instructions for downloading.
When the download is completed, EagleEyes is installed automatically on your mobile device.
Note: For more information about the configuration of this program, read the related instructions on the download page.
14. Setting Up Push Video
This DVR series supports instant event notifications to your iPhone, iPad, or Android mobile device with EagleEyes installed.
When a human is detected by a human detection camera or the external alarm device, the DVR will immediately receive
alarm signals and send them to your mobile device.
14.1 Prerequisite
Before setting up push video, make sure you have checked the following:
 You have an iPhone ® , iPad
EagleEyes.
 A human detection camera is connected to CH1, or an external alarm device is connected to the push video alarm-in
terminal on the rear panel. To record alarm occurrences, make sure you also have a camera connected. Refer to Push
Video Configuration for details on video channels and alarm pins.
 The event record function of your DVR is enabled.
 The motion detection function of your DVR is enabled.
 Your DVR is connected to internet. For details, refer to
http://www.surveillance-download.com/user/CMS.pdf.
14.2 Enabling Push Video
From iPhone or iPad
1. In the iPhone ® /iPad ® main menu, select Settings > Notifications.
2. Select EagleEyes and make sure Notification Center is set to ON.
3. Open EagleEyes and switch the Push Video button to ON. You will receive a message that push notification (push video)
is enabled.
4. Return to the main menu of your iPhone
You will receive event notifications when there is a human detection or an alarm event. Select Launch to play the
V. 01 – 25/09/2014
® , iPad ® , BlackBerry ® or Android
® or Android ® ) and download the program you need.
® , iPad
® or Android ® mobile device with EagleEyes installed. For more details, see Downloading
® /iPad ® .
DVR16H3
® .
® BlackBerry ® and Android ®
12
mobile devices.
©Velleman nv