Tanda elos me Guia Del Usuario página 14

Getting acquainted with me - control panel
2. Before turning on the system, the applicator must be
placed in the cradle. Press the power button to turn the
system on. All indicators will flash for several seconds, and
then the indicator next to the power button will turn green.
Now the system is ready for use.
4. The elo - s cartridge is pre-loaded with a set number of pulses for
your use; the counter starts at 100% and decreases as you use it.
The amount of pulses remaining in the
by the lights on the panel, as shown. Once the elo - s cartridge
reaches 5% of its capacity, a red light will start blinking, and at
0%, the red light will remain constant, indicating that the
cartridge must be replaced and responsibly disposed of. (Please
refer to the WEEE explanation on page 33).
1. Connect the cable to the system and then to the
wall electrical outlet. An orange indicator will appear
next to the power button.
3. Select the elo - s level you want to use by pressing
the appropriate elo - s level button: High, Medium
or Low; the active elo - s level will illuminate a white
indicator light. (Refer to the chart on page 11 of the
user guide to set the right elo - s level for your skin type).
cartridge is indicated
15 EN