Troubleshooting - Tanda elos me Guia Del Usuario

Troubleshooting

indicator
No lights are on.
Error light is blinking.
elo - s level lights are blinking
+ IPL light pulses stop.
Continuous error light.
No elo - s pulses.
elo - s white light is blinking. elo - s slot is empty.
epilator/shaver lights are
blinking.
If none of these suggested measures seem to help, contact your local provider for support, or
contact us at www.tanda.com.
EN 28
What does it mean
Control Panel
Power cable is not connected.
1. Button pressed for more than
10 seconds.
2. Grip sensors are held during
the start up test.
3. No cartridge level indication.
Ambient temperature is too high. Press elo - s button again.
Need to reset the system.
Not touching grip sensors.
RF bars are not in contact with
the treated area.
elo - s button is not pressed.
Applicator
Epilator/shaver slot is empty.
How to react
Connect power cable.
1. Release button (system will
return to standby mode).
2. Place applicator in cradle.
Press power on again.
3. Pull out cartridge and re insert.
If not working, insert a new cartridge.
If not working, move to a cooler
area with less than 30 Celsius/86.
Fahrenheit degrees.
Reset.
Disconnect power cord.
Wait until all lights are off (up to two min).
Reconnect the power cord and turn on
the system.
In order for the device to emit elo - s pulses,
make sure all 3 conditions (elo - s button
on, touching grip sensors and RF bars in
contact with the skin) are met.
Insert elo - s protective cap or elo - s cartridge.
Insert epilator, shaver or a protective cap.