When You Are Done - Tanda elos me Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

When you are done

Unplug the system from the electrical
wall outlet.
Unless elo - s cartridge is empty, do not
remove it from the applicator.
If you do remove the elo - s cartridge,
insert the elo - s protective cap in place.
If applicable, clean the epilator/shaver
cartridge with the cleaning brush (supplied).
It is recommended to clean also with soft
tissue or non-alcoholic wet wipes.
Wipe off the applicator, and the glass
window of the elo - s cartridge in
particular, with soft tissue or non-alcoholic
wet wipes.
Store the applicator back in the base unit.
Store system away from the reach of children.
Warning: do not rinse any part of the
system with water.
NB: Do not use any cleaning agents
to clean the me - device and/or its
accessories.
www.tanda.com.
Visit
EN
26
Cleaning the shaver cartridge
1. Turn the system off and unplug the
electrical power cable from the
wall socket.
2. Remove the shaver cartridge by
pressing the two release buttons, and
sliding it out of the applicator.
3. Remove the foil-covered blade
assembly from the shaver cartridge by
pulling it out.
4. Use the supplied cleaning brush to
clean the blade assembly.
It is recommended to clean also with
soft tissue or non-alcoholic wet wipes.
5. Clean the bottom of the shaver
cartridge with the cleaning brush
supplied.
6. Insert the blade foil assembly into
the shaver cartridge again.
7. Put the shaver cartridge back on
again. Push down the shaving head
until it "clicks" into place.

Publicidad

Tabla de contenido
loading

Tabla de contenido