Z-Wave Connection Status - Honeywell Home T6 Pro Z-Wave Guia Del Usuario

Z-Wave connection status

Z-Wave connection status is located in the upper-right
Wifi is on and
connected
corner of the screen.
• Thermostat is included and connected to a
Z-Wave network.
or wifi is not setup
Wifi is on and
connected
Wifi is on and
• Thermostat is excluded from a Z-Wave network.
connected
Wifi is off
• Thermostat is either included in a Z-Wave
or wifi is not setup
network but the Z-Wave signal is lost, or is
or wifi is not setup
included but AC power is lost (battery used as backup). In this case, Z-Wave
Wifi is off
radio is turned off to preserve battery life. AC power must be restored or you have
Wifi is off
to change the power mode. It can be done via excluding thermostat from Z-Wave
network and including again in battery power mode where batteries are used as
main power source. You can check the actual power mode in the thermostat
MENU/DEVICE INFO.
Following Schedule
Example of thermostat
included and connected in a
Z-Wave network.
10
AM
Mode Fan
Heat Auto
Away Home Sleep
Mode Menu Fan