Viewing Equipment Status; Viewing Thermostat Information - Honeywell Home T6 Pro Z-Wave Guia Del Usuario

Viewing equipment status

You can check the status of your heating or
cooling equipment and fan by following the
steps below. Please note that system data may
vary depending on thermostat model and how
the thermostat was installed.
1 Touch Menu on the thermostat home screen.
2 Touch the
STATUS, then touch Select.
3 Touch the
system you want status information on.
After 3 seconds, system status information will
scroll on the screen.

Viewing thermostat information

To see your thermostat's technical information,
follow the steps below.
Touch Menu on the thermostat home screen.
1
2 Touch the
DEVICE INFO, then touch Select.
3 Touch the
such as:
• Model Number
• Power Mode
• Z-Wave Node ID
• Z-Wave Home ID
• Serial Number
• Date code
• Firmware version
• Z-Wave Firmware version
• Z-Wave library
or arrows until you see EQMT
or arrows to select which
or arrows until you see
or arrows to view information
Done
19
Back Select
Done
Back Select