Care And Cleaning; Stainless Steel Surfaces - Thermador HDDW 36DS Manual De Uso Y Cuidado

WARNING. To avoid risk of fire and explosion do not use flammable liquids or solvents.
Always unplug or disconnect the appliance from the power supply before servicing.
IMPORTANT: Do not clean the hood with abrasive
sponges or with cleaning agents which contain sand,
soda, acid or chlorine!
CAUTION. Avoid risk of crushing. Do not catch hand
between the filter brackets. Do not insert the filter drawer
while cleaning it.
Do not insert the filter drawer while cleaning it.
Danger of crushing!
Clean the hood with a hot soap solution or a mild
window cleaner.
Do not scrape off dried-on dirt but wipe off with a
damp cloth.

CARE AND CLEANING

PAGE 8
When cleaning the grease filters, remove grease
deposits from accessible parts of the housing.
This prevents the risk of fire and ensures that the hood
continues operating at maximum efficiency.
Note: Do not use alcohol (spirit) on plastic surfaces,
as dull marks may appear.
Caution: Observe all instructions and cautions
provided with cleaners.
IMPORTANT: Clean the operating buttons with a mild
soapy solution and a soft, damp cloth only.
Do not use stainless-steel cleaner to clean the operating
buttons.

Stainless steel surfaces:

Use a mild non-abrasive stainless steel cleaner.
Clean the surface in the same direction as it has been
ground and polished.
We recommend the stainless steel cleaner Fantastik
or Formula 409 ® sprayed onto a paper towel.
Aluminum and plastic surfaces:
Do not use dry cloths.
Use a mild window cleaning agent.
Do not use aggressive, acidic or caustic cleaners.
Observe the warranty regulations in the enclosed
service booklet.
®