Public Address (Pa) - Kenwood Nexedge NX-700 Manual De Instrucciones

PUBLIC ADDRESS (PA)

To use the Public Address system, your dealer must install an optional unit and an
external speaker. This function causes all audio input via the microphone to be
amplifi ed and output through the external speaker.
To use the PA system:
1 Press the key programmed as Public Address or access the Public Address
function through the Menu {page 12}
• PA appears on the display when the PA system is active.
2 Press and hold the microphone PTT switch, then speak into the microphone.
• Use the Volume Up and Volume Down keys to adjust the audio output from the
external speaker.
3 Press the Public Address key again or change the zone or CH/GID to return
to normal operation.
27