Bona Belt Lite Manual De Funcionamento página 12

Commencing Operation (Cont.)
Instructions for assembly following transportation (cont.)
3.
Secure the motor by tightening the
knob (A).
The drum belt must have a 10.5mm stretch with a center load of 30±3N.
Belt tension can be adjusted acting on the screw and the nut (A).
The suction belt must have a 8mm stretch with a center load of 18±2N.
The belt tension can be adjusted acting on the allen screw (B).
12
4.
Fit and stretch the belts.
Excessive belt tension may cause the premature failure of the ball bearings.
Using the machine when not fully assembled may cause injury or damage to people or objects.
DO NOT use the machine when it is not fully assembled. Keep all fittings tightly closed. Maintain
machine settings in accordance with the specifications.
Bona Belt Lite Manual
5.
Close the belt guard and tighten
the screw.