Description Of The Appliance - Bimar HR306 Folleto De Instrucciones

DESCRIPTION OF THE APPLIANCE

Frontal part:
 Switch for swinging
 Lower candle switch
 Upper candle switch
 Switch 0-I central
candle
1. Protection grill
2. Support
ASSEMBLING
Before each use, verify that the unit is in good condition, the electric cord is not
damaged, if the power cord is damaged, it must be replaced by the manufacturer or a
competent qualified electrician or a person with similar qualifications, in order to
avoid any risk.
ATTENTION: The heater must not be used if the plugs are damaged glass.
Attention: The appliance may only be used if complete with the support.
1) To operate easy, stand the appliance on a horizontal, flat and stable surface.
2) Unscrew the wing nut screws placed on the inferior part of the appliance.
3) Let the cable go out from the hole in the middle of the support and
assembling the support itself, putting it in the inferior body.
Inferior part:
3. Wing nut screws
4. Anti-upsetting system
5. Cable slideway
6. Cable
16