Publicidad
Idiomas disponibles
Idiomas disponibles
Before each use, check that the appliance is in good condition and that the
power cord is not damaged: if in doubt consult a qualified professional.
Ensure that the power cord is correctly positioned and does not come into
contact with hot parts or sharp edges, or become wound around the appliance
itself and is not twisted.
Do not hang or even lean the appliance against any walls.
Place the fan heater far from any other source of heat, from flammable material
(curtains, tapestries, etc.), from flammable gases or explosive objects (spray
cans) and from materials that can be deformed by heat. Make sure there is 120
cm of free space in front of the fan heater and 50cm free space on both sides
and behind it.
The surface where the appliance is used must be stable, spacious (do not use on
shelves), level (since the appliance could tip over) and heat resistant.
USING THE APPLIANCE
First use
Warning: run the appliance to eliminate the "new smell" and any oil residue from
the manufacturing process for at least 10/15 minutes. During this operation,
ventilate the room well to eliminate the "new smell" that is given off by the
appliance.
The fan-heater is fitted with switch sets following functions:
"0"= OFF; "
+ adjustable thermostat.
To use the fan heater, please follow the instructions below:
1)
Insert the plug in the current socket.
2)
To switch the appliance on, turn the knob anti-clockwise to the position
corresponding to the desired function.
3)
The light turns on and turns off when the appliance reaches the requested
temperature; if the thermostat is set at the maximum level, the appliance
works continuously.
4)
If you wish the oscillation function, press the oscillation button "
oscillation (rotation alternatively right and left).
5)
The base has an anti-tipping switch which allows the heating fan to function
only when it is positioned correctly (when it is put in place, you will hear a
"click") but it stops the appliance if it tips.
6)
To switch off the appliance, switch off the resistance completely, let only the
fan run for about 3 minutes (pos.
last longer), then switch off the fan by turning the knob to "0" (off). Then
always remove the plug from the power socket.
Never leave the appliance connected to the socket if it is not in use, especially
for long periods.
"= fan; "
"= air warm (800W); "
) to cool the resistance (this way it will
13
"= air very hot (1500W)
", and
Publicidad
