Using Pre-Ground Coffee - Philips HD7740 Manual De Instrucciones

EnglisH
10
7 Press the STRENGTH button once or several times until the desired
coffee strength is selected (mild, medium or strong).
, The STRENGTH button lights up when you press it.
The display shows the selected coffee strength.
,
8 Press the START/STOP button to start the brewing process.
Keep away from the steam vent during brewing, as hot steam escapes
through the vent.
The freshness indicator flashes on the display until the brewing
,
process is finished.
The coffeemaker produces 5 beeps when the brewing process is
,
finished.
, The hotplate switches on automatically.
Do not touch the hotplate while it is on, as it gets hot.
9 Wait until the coffeemaker has stopped beeping before you remove
the jug from the hotplate.
Note: After brewing, coffee drips from the filter basket for several seconds.
, The freshness indicator is shown on the display for 30 minutes after
brewing, to indicate that the coffee is fresh.
When the jug is empty, press the START/STOP button to switch off
10
the appliance and remove the jug from the hotplate.
Note: If you do not switch off the coffeemaker, it switches off automatically
after 30 minutes.

using pre-ground coffee

If you want to use pre-ground coffee instead of coffee beans, follow the
steps below.
1 Press the pre-ground coffee button to switch off the grinder.
The button lights up when you press it.
,
Note: When you switch off the grinder, the number of cups and the strength
setting are not shown on the display.
Put pre-ground coffee in the paper filter or in the permanent filter.
2
Note: How much pre-ground coffee you use is a matter of personal taste. For
a medium-strong cup of coffee, use one measuring spoon (approximately 4-5g)
for each cup (125ml).