Using The Ceramic Bowl; Before First Use; Important; Attaching The Ceramic Bowl - KitchenAid KSMCB5 Instrucciones

USING THE CERAMIC BOWL

CMD + SHIFT CLICK TO CHANGE COPY

Before First Use

Your Stand Mixer is individually adjusted at the factory for optimal performance. When
using the Ceramic Bowl, it may be necessary to readjust the beater-to-bowl clearance.
When correctly positioned, the handle and pour spout should not touch the pedestal
of the Stand Mixer.
Please refer to the Stand Mixer "Instructions" manual for complete information on adjusting
the beater-to-bowl clearance, or call 1-800-541-6390 Monday through Friday 8-8 EST and
we would be happy to assist you in making this adjustment.
IMPORTANT: Before use, wash with hot, soapy water, rinse and dry thoroughly. It is
not necessary to season the Ceramic Bowl before use.

Attaching the Ceramic Bowl

This Ceramic Bowl is designed to fit all
4.5 and 5 quart Tilt Head Stand Mixer
models except model KN15E1X. Follow
these instructions to attach the Ceramic
Bowl to your Stand Mixer.
1. Be sure speed control is OFF and Stand
Mixer is unplugged. Tilt the motor head
back.
2. Place the Ceramic Bowl on the clamping
plate, and attach by turning gently in a
clockwise direction.
3. Attach the appropriate accessory for
your recipe, using the directions in the
Stand Mixer "Instructions" manual. Then
place the motor head back in the down
position and lock into place.
4

Removing the Ceramic Bowl

1. Be sure speed control is OFF and
Stand Mixer is unplugged. Tilt the
motor head back.
2. Remove the accessory from the
Stand Mixer, using the directions in
the Stand Mixer "Instructions" manual.
3. Turn the Ceramic Bowl gently in a
counterclockwise direction to remove
from the Stand Mixer clamping plate.