SBS 3908 Manual De Instrucciones página 16

GB
AIR BLEEDING – fig. no. 7-10
7) Slowly pump the brake lever or pedal several times until no air
bubbles can be seen rising up through the fluid from the hose
at the bottom of the brake fluid reservoir.
9) Apply handle (A) in order to empty the hose of the remaining
fluid. Remove rubber pipe (B). Fit the brake fluid reservoir
cover and rubber cap.
Do not attempt to drive the vehicle until a firm brake lever or pedal is obtained
by pumping the brake lever or pedal until the pads/shoes touch the disc/drum.
The brake may not function on the first application of the lever or pedal if this
is not done.
For some vehicle brake applications a different brake fluid bleeding system
may apply. In such case instruction of the vehicle manufacturer must be
followed.
16
PRODUCT INSTRUCTION
8) A – Hold the brake applied (brake lever or pedal).
B – Quickly open/close the bleeder nipple.
C – Release the brake lever or pedal.
A + B + C are to be repeated until no air bubbles can be
seen in the brake system bleeder hose. Refill the brake fluid
reservoir until upper level line.
"CAUTION"
10) ALWAYS empty bleeder of used brake fluid when half full.
Please also see brake fluid warning instructions.
"CAUTION"
MADE IN DENMARK