Motorola PMLN6242 Manual De Instrucciones página 6

c. When the battery is properly seated in the pocket, the RED
LED illuminates to indicate that the battery is charging
rapidly.
d. The LED will change to a steady green light to indicate that
the battery is fully charged.
5. To charge a Bluetooth accessory:
a. Refer Table 4 for supported Bluetooth accessories.
b. Pull out the micro-USB plug.
c. Insert the plug into Bluetooth accessory.
d. See indicator light on the Bluetooth accessory for charging
status.
e. To remove a Bluetooth accessory from the charger, use
one hand to hold the micro-USB plug and the other hand to
remove the Bluetooth accessory. Pull by the plug rather
than the cord.
Power receptacle
Battery divider
LED
Micro-USB plug
For battery PMNN4425_
For battery HKNN4013_
Figure 1: Tri-Unit Charger
4
Battery pocket
Radio pocket