Program Smart Remote Control To Control Tv; Play; Play A Disc - Soundstream H-540DiMT Manual De Instrucciones

Program Smart Remote Control to
Control TV
You can store a total of 7 most frequently used func-
tion of your TV in the learning zone of the smart
remote control. This feature allows you to use only
one remote control to operate all of your TVs.
By default, the remote control codes of a TV are
stored in the smart remote control. The available
preset buttons are Standby,
ENTER, TV VOL+/VOL-, TV CH+/CH-.
NOTE:
During the learning process, the normal remote
control functions are disabled.
1 Place the smart remote control (A) within 5mm-
50mm distance from TV remote control (B).
2 Press and hold LEARN button for 2 seconds to
activate the learning mode. A red indicator on
the smart remote control (A) lights up.
3 Press one of the TV (learning zone) buttons
on the smart remote control (A), the red
indicator flashes.
4 Press the button on TV remote control (B) that
is to be stored on the smart remote control
(A). When the code is received successfully,
the red indicator flashes 3 imes, then turns red
again. If the red indicator flashes but does not
turn red, the code received is incorrect.
5 Repeat steps 3-4 to program more buttons on
the smart remote control (A).
6 Press LEARN to save the learning. Press it
again to exit learning mode.
(FUNCTION),
11

Play

Play a Disc

Caution!
- Never look at the laser beam inside the unit.
- Risk of product damage! Never play discs with
accessories such as disc stabilizer rings or disc
treatment sheets.
- Never put any objects other than discs into the
disc compartment.
1
Press the DISC/USB button to select the DISC
source.
2
Use the K DISC button to open the disc tray.
3
Place a disc onto the disc tray (with the printed
side up) and use the K DISC button to close the
disc tray.
4
The unit will read the disc and play it
automatically.
- To stop play, press the L button.
- To pause or resume play, press the
button.
- To skip to the previous/next title/chapter/
track, press the H/G buttons.
If play does not start automatically:
- Select a title/chapter/track and then press the
or ENTER button.
BF
Use the Disc Menu
When you load a DVD/(S)VCD disc, a menu may be
displayed on the TV screen.
To access or exit the menu manually:

Press the MENU button.
For VCD with PlayBack Control (PBC) feature

(version 2.0 only):
With the PBC feature, you can play VCD
interactively according to the menu screen.
During play, press the MENU button to enable/
disable PBC.
- When PBC is enabled, the menu screen is
displayed.
- When PBC is disabled, normal play is
resumed.
Select an Audio Language
You can select an audio language on video DVDs.
During disc play, press the AUDIO button.

- The language options appear. If the selected
audio channels is unavailable, the default
audio channel is used.
Note:
For some DVDs, the language can only be
changed from the disc menu. Press the
MENU button to access the menu.
Select a Subtitle Language
You can select a subtitle language on DVDs.
During play, press the SUBTITLE button.

BF