Installation Instructions - Richen EF42C Instrucciones De Operación

E N
INS TA LL ATIO N INS TRU CTIONS
WA R N U N G! ALWAYS unplug the electric chain from the mains before
assembling, cleaning or moving it. Failure to do so may result in elec -
tric shock , fire or injur y. Keep fabrics and other furnishings at least
0.9 m away from the front and sides of the electric fireplace. Af ter
installation, make sure the ventilation area is ≥
inside and outside of the fireplace inser t.
1. S E T TI N G U P T H E A PPLI A N C E
Your new electric fireplace may be installed vir tually any where in your home.
However, when choosing a location ensure that the general instructions
are followed.
• For best results, install out of direct sunlight.
• The appliance should be connected to an ear thed electrical outlet and
it must be easily accessible to allow disconnection.
2 . P OW E R S O C K E T
• Connect the mains cable (you can lead the mains cable from the framed
wall opening to an existing socket or install a socket on a nearby wall base
inside the wall).
• Make sure that the socket is in good condition and that the plug is not
loose. N E V E R exceed the maximum current rating for the circuit.
D O N OT connect other appliances to the same circuit.
22
0.004 m² between the
E N
3. I N S TA L L ATI O N I N A WA L L
• It is possible to install the unit in a wall. For better ventilation, an opening
depth of 235 mm is suggested. Construct the opening according to the
specifications below.
S K U W I DT H
EF42C 580–610
EF43C 660–690
EF44C 760–790
EF45C 840–870
• Prepare the opening and the diffuser, place the unit carefully into the
framed opening and no fixing brackets are required.
NOTE: If the existing opening is slightly narrower, the handles on both
sides can be removed.
H E I G H T D E P T H (R E C O M M E N D E D)
5 15 –5 4 0 ≥ 235
5 9 5 –6 2 0 ≥ 235
5 9 5 –6 2 0 ≥ 235
6 5 5 –6 8 0 ≥ 235
23