16 Troubleshooting
16.1 Safety notices
16.2 Causes and rectification of faults
caso Master E4 Slide
are accumulations of dirt, apply white vinegar to the polluted
zone.
► In order not to damage the plastic components, do not use
any solvent-based cleaning detergents such as, for example,
petrol.
► Do not use any flammable, acidy or alkaline materials or
substances near the device, as this may reduce the service
life of the device and lead to deflagration when the device is
turned on.
This chapter provides you with important notices with regard to
operating the device. Observe the following notices to avoid
dangers and damages:
► Only qualified electricians, who have been trained by the
manufacturer, may carry out any repairs on electrical
equipment.
► Improperly performed repairs can cause considerable
dangers for the user and damages to the device.
In the event of a fault, an error code will appear in the display; it
describes the cause of the fault. The following table assists in
localizing and rectifying minor faults.
Fault
Possible Cause
The induction
No power.
hob cannot
be turned on.
Operation and Handling
Attention
Attention
Make sure the induction
hob is
connected to the power
supply
and that it is switched on.
Check whether there is a
power
outage in your home or
To Rectify
69