Device Configuration - GPS cellular line Manual De Instrucciones

S A F E G P S t r A c k E r

4. DEVICE CONFIGURATION

Device configurations must be completed prior to start-
ing tracking with your GPS SAFE.
To complete device configuration of your GPS SAFE,
please follow the instructions below:
1 . Launch Track Manager .
2. On Track Manager, click on the main menu bar
to complete hardware settings.
4.1 Main
• Device Information: Fill in the device name and
phone number of your GPS SAFE, along with the PIN
Code required for your SIM Card .
• Device name, Phone number and Admin phone #1
entries are mandatory, and phone numbers must in-
clude country code and area code .
- Tracker Icon: Select the type of tracker your GPS
SAFE is .
- Language: Select the language of the SMS notifica-
24
tion messages .
• SOS Settings: Fill in at most 5 sets of phone numbers
for SOS alerts.
The entry of Admin phone #1 is mandatory, for it is the
SOS phone number that GPS SAFE will call out to in
case of emergency .
• Select Profile: Select a profile from the listed 5 op-
tions .
For each selected profile, you can also decide whether
to report your position or SOS alert via Text Messages
(SMS) or GPRS connection .
- Volume: Adjust the volume of the audio receiver
or speaker .
Note: Please be cautious and do not press close against
the speaker in loud speaker mode to avoid possible hear-
ing damage.
- Emergency SMS Report: Select the event that you
want to receive an emergency report for via SMS,
such as SOS event, Free-fall event, Geofence
event, Unexpected movement event, and Bat-
tery-low event.
- Report tracking data via: Select the method how
you want the tracking data be reported, either via
SMS to the Admin phone, GPRS connection to the
server, or none .
If GPRS Connection to server is selected, click Reg-
ister to Server to register your GPS SAFE with the
Tracking Server first.
While registering, create a new account with the
Tracking Server or log in with your account informa-
tion if you're an existing user .
- Tracking Interval: Select the tracking interval for
your GPS SAFE .
- Report Interval: Select the interval for your GPS
SAFE to send a tracking report .
- Free-fall detection: This option alerts the owner
when the device falls down from somewhere with
great altitude. Cases like this include working at a
spot with great heights, mountain climbing or hik-
ing and etc .
- Unexpected movement detection: This option
alerts the owner when the device has been detected
with movement for the time period selected.
Note: Since GSM is not activated until the GPS SAFE de-
tects movements, the time of SMS alert received will be
later than the time of movements detected.
- Reset: Click to reset hardware settings back to de-
faults .
S A F E G P S t r A c k E r
4.2 Geofence
Click to set the geofence area by dragging and
moving the frame shown on the map.
• Enable Geofence Alert: Click to start receiving geo-
fence alerts .
- Alert Type: Select whether you want to receive the
geofence alert when the device enters the geofence
area, exits the geofence area or both .
- Geofence Area: Here lists the measurement details of
the geofence area .
• Disable Geofence Alert: Click to stop receiving geo-
fence alerts .
IT
EN
FR
ES
DE