Kohler K-7338 Guia De Instalacion página 6

Rubber
Gasket
Wall Union
Shank
3. Install the Faucet Assembly
IMPORTANT! If you are mounting the escutcheons to an uneven
surface (such as tile grout lines), apply a suitable sealant in addition
to the foam gaskets provided. Do not use petroleum based sealant.
Confirm that a foam gasket is inserted in the groove of each
escutcheon.
Slide an escutcheon onto each wall union shank
Press the escutcheon against the finished wall and tighten the
setscrews with a 5/64" hex wrench.
Confirm that an O-ring is attached to each wall union shank and
a rubber gasket is attached inside each union nut.
Slide the faucet assembly onto the wall union shanks.
NOTE: Do not damage the O-rings on the wall union shanks or the
finish on the union nuts when using the strap wrench.
Using a strap wrench, tighten the union nuts to secure the faucet
assembly to the wall union shanks.
Verify the handles are in the OFF position, as shown.
1069114-2-A
Pipe Nipple
Foam Gasket
Escutcheon
O-Ring
Union
Nut
6 Kohler Co.