Start In Opening; Start In Closing; Start In Pause; Pedestrian Start In Opening - V2 City2 Instrucciones

START IN OPENING

This menu permits to select the functions of start during the
opening phase.
PAUS the command START stop the gate and goes into in
ChiU
no

START IN CLOSING

This menu permits to select the functions of start during the
closing phase.
StoP
APEr

START IN PAUSE

This menu permits to select the functions of the command
start during the standstill.
ChiU
no

PEDESTRIAN START IN OPENING

This menu permits to select the functions of the command of
START P . during the opening phase.
PAUS the command PEDESTRIAN START stops the gate and
ChiU
no

AUTOMATIC CLOSING

Permits the selection between the semiautomatic or automatic functio-
ning. By the semiautomatic functioning the command of START or PEDE-
STRIAN START opens the gate, when the opening is complete the gate
remains still until the successive command of opening, which will reclose
it. On the other hand, it stops automatically and remains in pause phase
for the set time, then it closes again through the set closing time.
no the automatic reclosing is not available, the gate is semiautomatic.
0.5"÷20' the reclosing is available, the standstill time is set from 0.5" to 20'.
IMPORTANT: If the automatic reclosing is not available, is necessary to enable
the start command in pause(menu St.PA)
22
PAUSE.
the command START close the gate.
the command START is not available.
the command START stop the gate.
the command START open the gate
the command START closes the gate.
the command START is not available. This function
cannot be selected until the automatic closing has
been activated (menu Ch.AU).
goes in pause.
the command PEDESTRIAN START closes the gate.
the command PEDESTRIAN START is not available.