DeLonghi TRD50615E Manual Del Usuario página 11

Please note: When you turn the beeper OFF, the beep-
er will still remain when you go from STANDBY to ON or ON
to STANDBY.
Memory
After an interruption of the power supply, when the power
returns, the appliance will resume in standby mode. When
the unit is switched on again by pressing the ON/STANDBY
button, the operating conditions will be same as previously
set in manual operation mode.
Alarms
The appliance has a diagnostic system that makes it possible
to signal malfunctions.
In case of problems, the display will show an alarm message
with a red square light:
- (Probe failure 1) + beep
Ambient temperature probe failure. Please contact
De'Longhi Customer Service.
- (Probe failure 2) + beep
Probe failure internal security
Customer Service.
- (High temperature)
When the product internal temperature is too high, the
heating element will automatically be turned off. The
display shows for two seconds, cycling. To remove
the cause of this alarm check that the unit is not cov-
ered.
- (Tip over safety device): a tip over safety device
turns the appliance off if it falls over or is positioned
inappropriately in such a way as to jeopardize safety.
The appliance emits a beep and a TOS on the display.
The appliance resumes operation a few seconds after
being placed in an upright position again in STANDBY
mode.
MAINTENANCE
Always remove the plug from the power outlet and allow the
radiator to cool.
Wipe radiator with a soft damp cloth, do not use detergents
and abrasives. Should the radiator not be in use over a certain
.
Please contact De'Longhi
length of time, wind the cord around the cord holder and
store it in a dry place. This appliance has been built to give
many years of trouble free service.
In case of malfunction or doubt, do not try to repair the heat-
er by yourself: this may result in a fire hazard or electric shock.
Call De'Longhi Customer Service.
11