DeLonghi TRD50615E Manual Del Usuario página 9

Example of display:
❶
❸
❺
How to change the daily timer program
1. To change the preset daily timer program the unit must
be turned into standby mode (power OFF).
Then, press and hold the timer button for 5 seconds.
2. The unit will emit a beep and 00.00 and the blinking
green light simbol will be displayed.
Turn the dial to select the Temperature set T1=green
light , or T2=red light, that you would like to have in
the room at 00:00 (midnight) hours and press the dial
to confirm.
3. The time digits will start blinking to enable setting the
length of the time interval.
4. Turn the dial clockwise till you reach the desired ending
time for this program interval.
You will be able to choose any time intervals of minutes.
5. Press the dial to confirm the end of the time interval,
and the temperature indicator light will start blinking
again to enable you to set the next program interval.
Set the desired program intervals along the 24 hours till
00:00 to complete the daily timer program following
the same procedure described in steps 3 to 5 above.
Please note:
- You must set timer settings to cover the entire 24 hour
period with last setting finishing at 00:00.
If you have set the timer settings correctly, you will hear
a beeping sound to confirm.
❷
❹
❻
- You must confirm your settings within 2 minutes or
the unit will automatically return to STANDBY and
timer settings just made will not be saved.
- Once daily timer program is completed, unit will
automatically return to STANDBY (power OFF) mode.
Example of display:
❶
❸
❺
How to display the daily timer program
If you need to check your previous settings of the daily timer
program:
1. With the power ON, press the timer button once to acti-
vate timer function.
Then, press the timer button again and hold approxi-
mately 5 seconds.
2. The display will show 00:00, the temperature indicator
light (T1=green or T2=red) and the clock icon will be
blinking.
3. Turn the dial clockwise to display the daily timer pro-
gram from 00:00 till 23:45.
4. Push the control dial to exit.
9
❷
❹