Installing Headrest (When Applicable) - Harmony DREAMTIME 2 Manual De Instrucciones

INSTALLING HEADREST (WHEN APPLICABLE)

! WARNING: READ THE FOLLOWING INSTRUCTIONS
CAREFULLY. ONCE THE HEADREST IS INSERTED INTO
THE BACKREST, IT CANNOT BE REMOVED.
1. Identify both the headrest and backrest. Ensure that
BOTH the headrest and the backrest side impact
supports face you (both face the same direction).
2. Push the Headrest Height Adjuster. While holding
the button pressed in, insert
the rectangular extension of the
headrest into the opening at the
top of the backrest as far as it will
go ❶.
3. While holding the Headrest Height
Adjuster pressed in, push down
hard until the headrest is fully
inserted. Press button to lower the headrest to the
desired position.
TIP #1: If you have difficulty inserting headrest, try
rocking headrest side to side
as you push down to insert
one side, then the other.
TIP #2: If you are still having problems
inserting the headrest, follow
steps #1-2 above, then turn
the entire unit upside-down
and,
Height Adjuster pressed in,
force headrest into backrest
by pressing down against the
floor. Turn unit upright and check if headrest is
properly inserted in backrest ❷.
Please call our Customer Service Department at
1-877-306-1001 if you are experiencing any difficulties.
15
with the
❶
❷
Headrest