Securing Child And Booster Seat In Vehicle - Harmony DREAMTIME 2 Manual De Instrucciones

! DO NOT position vehicle belt over top of the armrests ❻.
!
The vehicle seat headrest should not create a gap
between vehicle seat and booster seat ❼. If so,
remove the vehicle headrest.
1. Place booster seat firmly against the back of a
forward-facing vehicle seat. The vehicle seat MUST
be equipped with a 3-point lap-and-shoulder belt.
2. Place child in the booster seat with child's back flat
against the back of the booster seat.
3. Adjust headrest height so that the bottom of the
headrest is even with the top of the child's shoulders.
4. Thread shoulder belt portion of
the 3-point lap-and-shoulder belt
system through the shoulder
belt guide ❶ and ensure that
shoulder belt lies across child's
shoulder and chest, and NOT
across child's face or neck.
5. Thread both sides of the lap belt and the lower end
of the shoulder belt of the 3-point lap-and-shoulder
belt system UNDER BOTH booster seat armrests ❷,
and ensure that the belt is snug across child's hips just
touching their thighs and is NOT across their stomach.
❺
SECURING CHILD AND
BOOSTER SEAT IN VEHICLE
❻
❶
❼
❷
22