Removing/Installing Fabric Seat Cover; Using Cup Holder (When Applicable) - Harmony DREAMTIME 2 Manual De Instrucciones

REMOVING/INSTALLING FABRIC SEAT COVER

He adrest: Unhook the left and
right ELASTIC loops from each
shoulder belt guide ❶.
Backrest:
• Unhook the left and right ELASTIC
loops from their respective
buttons ❷.
• Unhook left and right ELASTIC
loops from each of the T-shaped
extensions at the base of the
backrest ❸.
Base: Detach hook and loop tab from back of seat.
TO INSTALL:
To reinstall fabric pads, repeat previous steps in reverse
order.

USING CUP HOLDER (WHEN APPLICABLE)

The cup holder is stored in the base of
the booster seat.
• To remove from storage, pull the cup
holder.
TO INSTALL:
1. Remove protective cap from the
desired side by lifting release tab on
protective cap and pulling cap off ❶.
Store protective cap for future use.
2. Slide cup holder into place over cup
holder clip ❷ until locked in place.
TO REMOVE:
1. Lift release tab on cup holder and pull cup holder off
cup holder clip. Replace protective cap if desired.
❶
❶
❷
❷
❸
❸
❶
❷
26