Descargar Imprimir esta página

Dension Audio Systems ice-Link FM Manual Del Usuario página 2

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 13
ice>Link FM
Please Note:
You cannot use the iPod and AUX source at the same
time.
The iPod's battery will be charged when the iPod is
connected to the
on.
If the radio switches off, the iPod playing will be paused,
and after 2-5 minutes it will be switched off
automatically.
Installation
Installation
1) During the installation check figure #3 for help.The
best place to install the
somewhere behind the car radio.
2) Remove the car radio from the dashboard according
to car manufacturers instructions.
3) Disconnect the car's antenna plug from the car radio,
and connect it to the floating cable socket (#4) of the
ice>Link FM
to be plugged into the socket of the radio.
If the car radio use different standard antenna plugs,
use the included antenna adapter kit. If you still have
incompatibility, use proper adapter cable pair
available in car accessories shops, or ask your dealer.
Attention!
The antenna cable of the ice>Link FM cannot be left
unconnected or extended by wires. It must be
connected to the antenna input of the radio all the
times.
4) Join the power harness leads to the radio harness
with the included Cable Splices, then plug the
connector (#2) to the
Black
Red
Purple
Tip:
if your radio has the motorized/power antenna
output, we suggest you to attach the purple cable to
it.
Connect the iPod cradle (#7) or the AUX cable (#6) to
the
ice>Link FM
ice>Link FM
. The
ice>Link FM
ice>Link FM
Ground
Constant +12V (Battery)
Switched +12V (ACC)
.
and the radio is switched
ice>Link FM
connector (#5) needs
.
GB
may be

Publicidad

loading