Publicidad
Idiomas disponibles
Idiomas disponibles
4. Remove (2) Phillips screws securing the
factory pocket, then unclip and remove
the pocket. (Figure D)
5. Unclip and remove the vent panel above
the radio. (Figure E)
6. Remove (4) 10mm screws securing the
radio/climate control panel (2 above and
2 below). (Figure F)
7. Slide the radio and climate control
assembly out, then unplug and remove.
Continue to Kit Preparation
DASH DISASSEMBLY
(Figure D)
(CONT)
(Figure E)
(Figure F)
REV. 8/14/2019 INST99-8249
3
Publicidad
