Publicidad
Idiomas disponibles
Idiomas disponibles
From the factory radio/climate control panel:
1. Slightly loosen (10) Phillips screws
securing the radio brackets to the radio.
(Figure A)
2. Remove (4) Phillips screws securing the
climate controls, then unclip and remove
the controls. (Figure A)
3. Remove (2) panel clips from the radio.
(Figure A)
To the 99-8249 radio brackets:
4. Secure the climate controls to the
brackets using the factory screws.
(Figure B)
To the 99-8249 radio trim panel:
5. Attach the factory panel clips to the
panel. (Figure C)
Continue to Kit Assembly
4
KIT PREPARATION
(Figure A)
(Figure B)
(Figure C)
1.800.221.0932
|
MetraOnline.com
Publicidad
