AEG SANTO C 8 18 42-6i Manual De Instrucciones página 18

18 Installation
1. Loosen the upper pin and remove the
spacer.
2. Remove the upper pin and the upper door.
3. Remove the hinge cover (A). Unscrew the
pins (B) and spacers (C). Fit the hinge cover
(A).
4. Remove the lower door.
5. Loosen the lower pin.
On the opposite side:
1. Install the lower pin.
2. Install the lower door.
3. Refit the pins (B) and the spacers (C) on
the middle hinge on the opposite side.
4. Install the upper door.
5. Tighten the spacer and tighten the upper
pin.
All manuals and user guides at all-guides.com
C
B
A