MAINTENANCE AND CARE
CAUTION! To Reduce the Risk of Injury
From Moving Parts, Unplug Before Servicing.
Jammed Brushroll
(R25P & R25D models)
If an object, such as a throw rug or article of
clothing is ever picked up into your
vacuum, the vacuum will sense this jammed
brushroll condition and turn off the brushroll.
When this happens the headlight will
flash red.
• Turn off and unplug the vacuum.
• Remove the cause of the jam.
• Turn the vacuum back on.
• If the brushroll is free of obstructions and
the headlight still flashes, it's likely there
is an issue with the brushroll motor.
If so, please take your vacuum to an
Authorized Vacuum Retailer for service.
Dirt Sensing Display
(R25P Model)
This model is equipped with two amber
lights (Fig. 3) that illuminate the edges
of the cleaning path when your vacuum
detects that dirt is being picked up by the
machine (while in the carpet cleaning
mode). Continue vacuuming this area
until the amber lights no longer illuminate.
When only the white headlights
are illuminated, then all of the deeply
embedded dirt has been removed from
your carpet, and you should move on to
a new area.
Cleaning the Dirt Sensor Eye
(R25P model)
If the amber lights run continuously, it may
be the dirt sensor eye has become coated
with moist dirt. To remedy this situation,
simply vacuum up a small amount of
uncooked rice which works to clean the eye.
Repeat, if necessary. If the problem persists,
contact an Authorized Vacuum Retailer.
18
Red Lights
Red lights flash indicating a brushroll jam
Amber Light
When the amber lights are no longer
illuminated, your carpet is clean.
Amber Light
Fig. 3