Belt Protection Breaker Reset; Thermal Motor Protection - Riccar R25P Manual De Usuario

CAUTION! To Reduce the Risk of Injury
From Moving Parts, Unplug Before Servicing.

Belt Protection Breaker Reset

(R25S model)
If the Belt Protection System shuts off
your vacuum, follow these steps:
• Unplug the vacuum.
• Recline the vacuum to the flat position.
• Locate the Breaker Reset Button under
the top of the nozzle (Fig. 1).
• Press the Reset Button and resume
vacuuming.

Thermal Motor Protection

Your vacuum is equipped with a safeguard
to recognize when the vacuum might
overheat and shuts itself off. When this
happens the headlights are still on but
the motors shut off. Common reasons
why a vacuum may overheat include
operating with a full bag or when there
is a clog in the vacuum.
If the Thermal Motor Protection System
shuts off your vacuum, follow these steps:
• Unplug the vacuum.
• Inspect the vacuum for a full bag
condition or a hose clog and correct
the problem.
• Locate the Thermal Motor Protection
Reset Button on the back of the vacuum
(Fig. 2). Press the button and resume
vacuuming.
If problem continues, contact an
Authorized Vacuum Retailer.
MAINTENANCE AND CARE
1. Unplug machine
2. Locate problem
source (clogged
hose or full bag)
Fig. 1
Thermal Reset
1. Unplug machine 3. Correct problem
2. Locate problem 4. Press reset button
source (clogged
If problem persists,
hose or full bag) consult owner's manual
or contact retailer.
Fig. 2
Thermal Reset
3. Correct problem
4. Press reset button
If problem persists,
consult owner's manual
or contact retailer.
19