SATA AE1022H Manual Del Uso página 64

64
AE1022H/AE1022H-3
中文
EN
- Use a crowbar to pry the tire bead onto the bulge part on head
end of the mounting head. Step on the rotary table steering
pedal (Figure 5-1 K) to turn the rotary table clockwise until the
upper tire bead is completely removed. If a tire with an inner
tube is to be dismounted, in order to avoid damaging the inner
tube, the valve shall be about 10 cm away from the right side of
the tire dismounting head during operation.
- In order to dismount the inner tube, step on the pedal to tilt the
column without releasing the locking of the tire dismounting
arm; repeat this operation to break the tire opening on the other
side.
DE RU KO PT JA ES