GRUPO temper KOBAN KP 2600 Manual Del Usuario página 17

4.1 F. Func.
Ω range, press this
In
button to select or
function. Different symbol of
function will appear on the LCD.
4.2 R.Range
Press this button to select auto
and manual range. When a
function with auto and manual
mode is selected, the meter
enters auto range at first. To
change to manual range, push
this button once.
When the meter operates in
manual ranging mode, push this
button to change range to the
higher one and hold this button
for more than 3 seconds to
return to auto range mode.
4.3 Δ REL
Push the button to get relative
measurement mode, "REL"
annunciate display on LCD. But
store the displayed reading as a
reference value.
In the Relative mode, the value
shown on the LCD is always the
difference between the stored
reference value and the present
reading. If the new reading is the
same as the reference value, the
display will be zero.
4.4 % Hz
Push the button is used to
select frequency or duty cycle
measurement.
www.grupotemper.com
Open jaw digit electrical tester
5. LCD display
or Ω
cfg
Low battery indication
Auto range indication
Relative measurement
indication
Hold data indication
DC input indication
AC input indication
Diode test indication
Continuity indication
Polarity indication
Capacitance measurement
nμF
unit
kMΩ Ohm measurement unit
Frequency measurement
Hz
unit
mVA Current measurement unit
Duty cycle measurement
%
indication
KP 2600
Instructions manual | 17