CT-UTVM QRG
About This
Guide
Disclaimer
Safety Notes
Contact
What Is
Included
Not
Included
The CT-UTVM Quick Reference Guide (QRG) has basic product
information on how to use your new television mount. See
www.chauvettrusst.com
Read ALL the Safety Notes in this document before installing, using, or
maintaining this product. CHAUVET® may change this QRG at any time.
· Carefully inspect the mounting plate, arms, and connecting hardware.
· Only trained people should assemble the CT-UTVM.
· Be sure to determine what kind of arms are required to carry the TV for
each job.
· DO NOT use the CT-UTVM for loads that exceed the maximums
provided in this QRG.
· DO NOT use the CT-UTVM if any sections or joints are cracked or
appear damaged in any way.
· ONLY hang on horizontal rungs of trusses. Diagonal and vertical rungs
are not designed to bear weight.
· DO NOT use the CT-UTVM if the arms, mounting plate or connecting
hardware are bent.
· Install the CT-UTVM properly using all necessary parts.
· DO NOT drag the CT-UTVM over surfaces or other TV mounts. If you
cannot carry the CT-UTVM properly alone, make sure someone else
can help you.
· DO NOT use a CT-UTVM that has been dropped.
CAUTION: The maximum load capacity for the CT-UTVM is 200
lbs (90.7 kg). DO NOT exceed this number.
Supported television sizes are 26–50 in (66–127 cm).
Outside the U.S., United Kingdom, or Ireland, contact your distributor to
request support or return a product. Visit
contact information.
·
CT-UTVM
·
Connecting Hardware
The following common items are not included, but are suggested in the
assembly and mounting of the CT-UTVM.
·
Drill
·
Drill Bit 3 mm
·
Masonry Drill Bit 12 mm
·
Hammer
·
Pencil
Be sure to follow all instructions and cautionary statements that may
accompany any additional items you obtain.
for the latest information on the CT-UTVM.
·
Warranty Card
·
Quick Reference Guide
·
Phillips Screwdriver
·
Stud Finder
·
M6 x 76 mm Hex Wood Screws (4)
·
M6 Hex Wrench
2
www.chauvettrusst.com
EN
for