Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
WARNING: To avoid build-up of metal swarf inside the machine,
we recommend to clear the ventilation slots on a daily basis. Refer
to Maintenance.
Using Flap Discs
WARNING: Metal dust build-up.
Extensive use of flap discs in metal applications can result in the
increased potential for electric shock. To reduce this risk, insert an
RCD before use and clean the ventilation slots daily by blowing
dry compressed air into the ventilation slots in accordance with the
below maintenance instructions.
MAINTENANCE
Your D
WALT power tool has been designed to operate over a
E
long period of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and regular
cleaning.
Pop-off Brushes
The motor will be automatically shut off indicating that the carbon
brushes are nearly worn out and that the tool needs servicing.
The carbon brushes are not user-serviceable. Take the tool to an
authorised D
WALT repair agent.
E
WARNING: To reduce the risk of injury, turn unit off and
disconnect tool from power source before installing and removing
accessories, before making any adjustments or removing/installing
attachments or accessories.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
WARNING: Blow dirt and dust out of the main housing with dry
air as often as dirt is seen collecting in and around the air vents.
Wear approved eye protection and approved dust mask when
performing this procedure.
WARNING: Never use solvents or other harsh chemicals for
cleaning the non-metallic parts of the tool. These chemicals may
weaken the materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
Accessories
WARNING: Since accessories, other than those offered by
D
WALT, have not been tested with this product, use of such
E
accessories with this tool could be hazardous. To reduce the risk of
injury, only D
WALT, recommended accessories should be used
E
with this product.
Recommended accessories for use with your tool are available at
extra cost from your local dealer or authorized service center.
11
Publicidad
